Top Fencing is a crowd control barriers manufacturer; Crowd control Barriers, which establish line space, or block off restricted areas, are ideal for events where larger crowds gather. They act as portable railings to direct visitors and serve as a physical and psychological barrier that deters crowds from entering restricted areas. Hot-dip galvanization ensures that barriers will remain rust-free in outdoor settings.
Main Frame:
The heavy-duty crowd control barriers outside the perimeter (mainframe) are 38mm diameter pre-galvanized steel tubing, 1.4mm in thickness. The outer frame is a single length of tubing without welds or deformation. The pipe is bent at right angles with a minimum of smooth deformation. Horizontal and vertical bars are at right angles to the overall frame.
Specification Crowd Control Barriers From Manufacturer
Crowd Control Barrier | |
Place of Origin | Hebei China |
Length | 2.0m-2.5m or customized |
Height | 1.0m-1.5m or customized |
Frame Tubing | 20mm.25mm.32mm.40mm.42mm.48mm O.D |
Upright Tubing | 14mm. 16mm. 20mm.25mm O.D |
Finished | Hot dipped galvanized or hot-dipped galvanized with PVC coated |
Frame | 2.1*1.1m, 2.4*1.2m or as your requirement |
Infill Picket | 20mm.25mm.32mm.40mm.42mm.48mm O.D |
Spacing | 14mm. 16mm. 20mm.25mm O.D |
Feet | 60mm.100mm.190mm.200mm |
Optional Frame And Foot From crowd control barriers manufacturer | Detached, Flat, Bridge Type |
Advantages of Buy Crowd Control Barriers From Manufacturer
Bases
Traditional bridge bases are designed so that each steel barrier has one large base and one small base located at the extreme ends of the frame.
This allows for four points of the base to remain in constant contact with the ground and accommodate the placement of steel barriers in both a straight line at various angles.
crowd control barriers manufacturer types of bases:
Bridge Base
"U" Base
Flat Base
Wheel Base
Hooks
Our steel barriers are designed to be linked together via male hooks.
A bend in the male hook creates a positive interlock which prevents it from becoming disengaged.
Each male hook is a 5/8" steel rod welded to the frame on both ends.
8. Each female receptor is a 3/16" by 1.5" steel plate welded to the frame.
Main features of our designs:
Hot dipped galvanized coating for longevity – MIN 71 microns
Sturdy lightweight frames stacking or moving
Easy interlocking system for fast installation
Removable/locking feet for stacking and storing ease
Flat foot design for avoiding trip hazards
As a crowd control barriers manufacturer, we have two finishing choices; the first is pre-galvanized and spraying paint on weld points. The second is pre-galvanized and powder coated in a different colour. Any RAL colour is available.
![]() |
![]() |
![]() |
Pre-galvanized | PVC powder coated in grey colour | PVC powder-coated in yellow-green colour |