358 security fence

358 security fence is our unique design fencing system for a security solution."C" Post, with Flat Bar, Easy Installation, high security. It includes panel mesh, post and accessories; the panel mesh: is welded with galvanized wire as per EN10244, the post is: shaped from galvanized coils as per EN10346; The bolts and nuts are stainless steel 304.

Tolerances

Sheet Width +/- 2mm
Sheet Length +/- 2mm
Mesh Aperture +/- 0.5mm
Wire Diameter +/- 0.08mm

Standard

Wire Coating Mass Zinc Aluminium coating to AS/NZS4534 Class W10DZ
Tensile Strength Ultimate Tensile Strength 500-625 MPA Average Tensile Strength 560 MPA
Weld Shear Strength Exceeds requirements specified in AS2423-2002
358 security fence Galvanized complied with compliance with AS/NZS4680-2006
Reference standard:BS1722-14,ISO1461,EN13438,EN10436

How to Install 358 Security Fence?

358 security fence Panels terminated at finished ground level OR Panels terminated 300mm below finished ground level in a 300mm x 300mm trench, backfilled with Concrete / Pea gravel / Compacted fill.

Surface treatment:

358 security fence Panels and posts are powder coated with Akzo Nobel- Interpon 600 series powder and pass 500H-1000H salty spray followed by ISO9227

358 security fence physical and chemical compositions
Tension strength	400-600Mpa
Welding strength	At least 50% of wire tension strength
Yield strength	485Mpa
Hot-dip galvanized Zinc coating thick	70um (500g/m²)
Polyester powder coated thick	100um
Brand of Polyester	AkzoNobel
Standard	ASTM-123, BS10244-2 Z40, BS1722-14, BS13438
Life Warranty	At least 10 Years
The inspection report we have	TUV, SGS, BV, Intertek

Feature

1, 358 mesh 76.2x12.7 mm mesh size, for maximum visibility and protection well through view, Anti-climb
2, Rigid enough with perfect steel structure, Anti-cut,
3, Simple and easy installation
4, Alternative for both ground bury or flange installation
5, Suitable for flat ground and slope ground installation
6, High standard welding, give quality welding strength, yield strength
7, International Brand of polyester, or Hot dip galvanized Finish treatment give long life warranty of your fencing wall

Specification 358 security fence

358 Fence Height m	Panel Size (H×W)mm	Mesh	Wire	Post	Post height mm
2.0	2007×2515	76.2mm×12.7mm 75mm×12.7mm 75mm×13mm	1. 4mm for galvanized wire (zinc coating 240g/square meter) 2. Galfan wire (5% aluminum 95% zinc),zinc 260g/square meter Weld strength is 75% of the minimum tensile strength of the wire (tensile range 540-690 N per square meter).	60×60×2.5mm	2700
2.4	2400×2515			60×60×2.5mm	3100
3.0	2997×2515			80×80×2.5mm	3800
3.3	3302×2515			80×80×2.5mm	4200
3.6	3607×2515			100×60×3mm	4500
3.6	3607×2515			100×100×3mm	4500