358 High-Security Fence For Sale

The 358 high-security fence system is well known globally as an anti-climb & anti-cut barrier while providing the lowest level of high-quality carbon steel wires. It is designed to give attractive, long-lasting, and secure perimeter protection for industrial and commercial properties public utilities. It is suited for electronic alarm and detection systems- no blind spots for CCTV. It is also a good choice for the Military, airports, secure units and prisons.

Material: low carbon steel wire

SURFACE TREATMENT

358 high-security fence available follow surface treatment

1. hot dipped galvanized wire + PVC coated

2. Electro galvanized wire + PVC coated

3. hot dipped galvanized after welding

4. Electro galvanized after welding

SPECIFICATIONS 358 high-security fence 2D Fence Panels

Panel-Type A(2D view)
Mesh	Wire Thickness	Surface Treatment	Panel Width	Height
76.2×12.7mm	Horizontal wire:3,3.5,4mm Vertical wire: 4mm	Galvanized and Electrostatic polyester powder coated or hot-dipped galvanized.	2.5m or 2.2m	1800mm
				2000mm
				2100mm
				2200mm
				2400mm
				2500mm
				3000mm
Weld strength:-75% of the minimum tensile strength of the wire; Tensile range 540-690 N/m²

3D Fence Panels

Panel-Type B(3D View)
Mesh		Wire Thickness		Surface Treatment		Folds Nos	Panel Width		Height
76.2×12.7mm		Horizontal wire:3,3.5,4mm Vertical wire: 4mm		Galvanized and Electrostatic polyester powder coated or hot-dipped galvanized.		3	2.5m or 2.2m		1800mm
						3			2000mm
						4			2100mm
						4			2200mm
						4			2400mm
						5			2500mm
						6			3000mm
Weld strength:-75% of the minimum tensile strength of the wire; Tensile range 540-690 N/m²
Panel-Type C(2D View, adding wire)
Mesh	Wire Thickness		Surface Treatment		Panel Width			Height
100×15mm	Horizontal wire:3.5mm Vertical wire: 5.5mm		Galvanized and Electrostatic polyester powder coated or hot-dipped galvanized.		2.5m or 2.2m			1800mm
								2000mm
								2100mm
								2200mm
								2400mm
								2500mm
								3000mm
With additional horizontal wire of 3.5mm at 18cm intervals
Weld strength:-75% of the minimum tensile strength of the wire; Tensile range 540-690 N/m²

"358 fence" comes from its measurements of 3"×0.5"×8 gauges, which equates to approx. 76.2mm×12.7mm×4mm (Length×Height×Diameter) in metric. Three hundred fifty-eight security fences are challenging to penetrate, with the small mesh aperture being effectively finger proof and extremely difficult to attack using conventional hand tools. Three hundred fifty-eight fences are recognized as one of the most difficult to break through the barrier because it is difficult to climb. It is called security fencing and high-strength fencing.

Products Reference	Height (mm)	Width (mm)	V(mm)	H	Wire Thickness
Anti-climb-900	900	2400	75	12.5/25	4
Anti-climb-1200	1200	2400	75	12.5/25	4
Anti-climb-1500	1500	2400	75	12.5/25	4
Anti-climb-1800	1800	2400	75	12.5/25	4
Anti-climb-2100	2100	2400	75	12.5/25	4
Anti-climb-2400	2400	2400	75	12.5/25	4
Anti-climb-2700	2700	2400	75	12.5/25	4
Anti-climb-3000	3000	2400	75	12.5/25	4
Anti-climb-3300	3300	2400	75	12.5/25	4
Anti-climb-3600	3600	2400	75	12.5/25	4
Post Specification	50x50	50x75	65x65	60x60	4
Razor wire on the top: According to the client's request.

we provided clips and clamp bar configuration, providing a simple and easy installation method. Supplied with through bolts, washers and nuts and installed using either power or hand tools.

Automatic sliding gates

Depending on your needs, we can build metal swing gates, Automatic sliding gates, and wickets.

Material	low carbon steel
Surface treatment	hot dipped galvanized + powder coating
Wire diameter	4mm
Mesh hole	76.2 x 12.7mm, etc.
Post	60x60mm, 80x80mm ( thickness 1.5 - 2mm )