Anti-climb fence & anti-cut fence
Application:
358 Anti-Climb mesh fence Features:
- Anti-climbing: more small openings, no toe or finger holds.
- Anti-cut: robust Wire aWireelded joints make cutting very difficult by bolt cutters and wire cutters.
- High strength welded at each intersection.
- Durable: covering Galvan and polymer powder coating ensure long service life.
- Mesh fencing is specially configured to provide maximum visibility, primarily used for emergency and electronic detection systems.
Anti-Climb Fence Panels Specification
- Mesh pattern: 76.2mm (3") × 12.7mm (0.5") resistance welded well at each intersection
- Wire diameter: 4mm horizontal Wire and vertical Wire.
- Weld strength: range 540-690 N/m2
- Surface treatment: 358 mesh fence panels made from Galvan Wire, PVC powder coating (Min. 100 microns), or PVC powder painting. It provides additional protection and increases the potential life span.
- Colors: Green RAL 6005, or Black RAL 9005.
- Installation: Overlapped 75mm minimum at each post (shown as the two following pictures below) for securing with slotted clamp bars and M8 diameter bolts.


ANTI-CLIMB FENCE PANELS SPECIFICATION | ||||
---|---|---|---|---|
Fence height m | Panel size (Height × Width) | Fence Post (Height × Size × Thick ) | Clamp Bar (Height × Width × Thick ) | Inter or corner Clamp No (PCS) |
2.0 | 2007mm ×2515mm | 2700mm ×60×60×2.5mm | 2007mm ×60mm ×5.00mm | 7 or 14 |
2.4 | 2400mm × 2515mm | 3100mm×60×60×2.5mm | 2400mm ×60mm ×5.00mm | 9 or 18 |
3.0 | 2997mm ×2515mm | 3800mm×80×80×2.5mm | 2997mm ×80mm ×6.00mm | 11 or 22 |
3.3 | 3302mm ×2515mm | 4200mm×80×80×2.5mm | 3302mm ×80mm ×6.00mm | 12 or 24 |
3.6 | 3607mm ×2515mm | 4500mm×100×60×3.0mm | 3607mm×100mm×7.00mm | 13 or 26 |
3.6 | 3607mm ×2515mm | 4500mm×100×100×3.0mm | 3607mm×100mm×7.00mm | 13 or 26 |
4.2 | 4204mm × 2515mm | 5200mm ×100 ×100 × 4.0mm | 4204mm ×100mm × 8.00mm | 15 or 30 |
4.5 | 4496mm × 2515mm | 5500mm × 100 ×100 × 5.0mm | 4496mm × 100mm ×8.00mm | 16 or 32 |
5.2 | 5207mm ×2515mm | 6200mm×120×120×5.0mm | 5207mm×100mm×8.00mm | 18 or 36 |
- Anti Clim Fence Material: high-grade steel for maximum strength and rigidity.
- Post section: 80×60mm, 80×80mm or 120×60mm.
- Post Plate thickness: 2.5mm or 3.0mm.
- Finish: inside and outside galvanized (Min. 275 g/m2), subsequently covered with a polymer powder (Min. 60 microns).
- Colors: Green RAL 6005, or Black RAL 9005.
- Post cap: 80×60mm and 120×60mm post with metal caps, and 80×80mm post with a plastic cap.
- Metal clips and clamps are hot dips galvanized, then powder coating in green or black color.
358 security mesh panels package

2D Anti-Climb Fence
Green color powder coating 2D security fencing with 6mm vertical wire and 4mm double horizontal Wire | Details of 2D security fencing panel installed on post |
![]() |
![]() |
2D Anti-Climb Fence Panels Specification
358 Mesh opening: 76.2mm × 12.7mm welded at each intersection.
Horizontal wires: 4mm diameter at 12.7mm centers on the attack face, and intermittent 4mm double wires at 152.4mm centers on the inside face.
Vertical wires: 6mm diameter at 76.2mm centers.
The post has a single row of M8 threaded inserts that allow the panels to be fitted with specialized pressed steel brackets and are pitched at 2.55m centers.
Panel width, height, finish, fence post and clamps are the same as 358 mesh fence.
3D Anti-Climb Fence
The 3D Anti-Climb security fence is similar to the 358 mesh fence, and they are both made from 4.0mm wire in a 12.7×76.2mm mesh pattern. But 3D security fence enhanced its appearance with pressed horizontal 'V-shaped beams. It is a unique barrier solution that combines a high level of safety and aesthetic appearance. Usually, 3D security fencing is recommended for schools, recreational areas, hospitals, railways, ports, airports, warehouses, industrial facilities, or commercial.

Specification Anti-Climb 3D Fence
Table-2: 3D security fence system specifications | |||||||
---|---|---|---|---|---|---|---|
Panels | Posts | ||||||
Fence height | Panel Size Height/Width | Number of Beams | O/A Length | Material and fixings | |||
Inters | Corners | ||||||
m | Material mm | Fixings | Material mm | Fixings | |||
2.0 | 2000 × 2515 | 2 | 2700 | 80×60×2.0 RHS | 6 | 80×80×2.5 SHS | 12 |
2.4 | 2400 × 2515 | 3 | 3100 | 80×60×2.0 RHS | 7 | 80×80×2.5 SHS | 14 |
3.0 | 3000 × 2515 | 3 | 3800 | 80×80×2.5 SHS | 10 | 80×80×2.5 SHS |
20 |