358 anti-climb fence

358 anti-climb fence are challenging to penetrate and Weld strength is 75% of the minimum tensile strength of the wire (tensile range 540-690 N per square meter). , with the small mesh aperture being effectively finger proof and extremely difficult to attack using conventional hand tools. 358 fences are recognized as one of the most difficult to break through the barrier because it is difficult to climb. It is called security fencing and high-strength fencing. 358 security fencing panel can be bent to enhance the aesthetic effect. While 3510 Security Fencing has many of the attributes of 358 anti-climb fence, its main strength is lighter. Using 3mm wire instead of 4mm allows even better visibility allowing a wider variety of applications. It's lighter and cheaper, so it's ideal for commercial applications.

Usages and Application 358 anti-climb fence

our 358 anti-climb fence system provides an ideal solution for a wide variety of high-security perimeter and access control applications. Widely used in villas, communities, gardens, schools, factories and other flower beds, lawns, industrial and mining enterprises, financial institutions, sports stadiums, convention centers, squares, roads, balconies, residential use, its flowing lines, simple and beautiful and full of rich modern residential sensual, garden Light, villas era of high grade. Simple installation, easy maintenance, easy to clean, affordable, eliminating maintenance.

Clamp Types

Our 358 anti-climb fence available two types of clamp first is flat steel made clamp bar and the second is M shapes Metal clamp you can choose these clamps according to the requirements

High Security Fence galvanized 358 Fence welded wire mesh panel fencing

358 anti-climb fence provides an ideal solution for a wide variety of high-security perimeter and access control applications. (sometimes referred to as prison mesh or 358 mesh) with its small apertures and welds at each intersection eliminates foot and finger holds, prevents objects from being passed through and is particularly effective against the use of conventional hand cutting tools.

358 anti-climb fence Specification

358 FENCE POST AND CLAMP BAR

- Galvanised rectangular hollow section 60 x 60 x 2.5mm bolt through posts. Complete with 25 x 5mm slotted clamp bar, M8 x 100 galvanized cup square round bolts and hex. Nuts (sheer- nuts - optional) with flat washers fixings at 305mm centers (9no fixings per intermediate post). Posts and clamp bar polyester powder coated Green RAL6005 / Black RAL9005 to pass 1000 hour salt spray testing.
- Post centres: 2440mm.
- Excess bolt thread at the rear of the post to be removed (flush to the nut), ensuring no sharp edges and made suitable using a zinc-etch primer paint.

Panel size H*W (mm)	Post size LWT(mm)	Post Height	Clamp Inter/Corners
2000*2400	60602.5mm	2700	7/14
2400*2515	60602.5mm	3100	9/18
2997*2515	80802.5mm	3800	11/22
3607*2515	100603mm	4500	13/26
4204*2515	1001004mm	5200	15/30
4496*2515	1001005mm	5500	16/32
5207*2515	1201205mm	6200	18/36

Specifications Promax 358 Security Mesh Australia Standard:

Mesh Design Ø4.00mm wire resistance welded at each intersection.

Line wires positioned at 75mm centers.

Crosswires positioned at 13mm centers.

Welding Resistance welded in compliance with the

requirements of AS2423-2002

Mesh Aperture 71mm x 9mm

Tolerances Sheet Width +/- 2mm

Sheet Length +/- 2mm

Mesh Aperture +/- 0.5mm

Wire Diameter +/- 0.08mm

Wire Ø4.00mm Zalcote XL Medium wire as per

OneSteel Market Mills wire specification.

Tolerance +/- 0.08mm

Wire Coating Mass Zinc Aluminium coating to AS/NZS4534

Class W10DZ

Minimum Coating Mass - 260 g/m2

Average Coating Mass - 300 g/m2

Tensile Strength Ultimate Tensile Strength 500-625 MPA

Average Tensile Strength 560 MPA

Weld Shear Strength Exceeds requirements specified in AS2423-2002

Standard sheet size
2404mm x 3592mm	75.7
2404mm x 2994mm	64.7
2404mm x 2695mm	58.1
2404mm x 2396mm	51.6
2404mm x 2097mm	45.2
2404mm x 1798mm	38.5

Color

Galvanised & polyester powder coated Green RAL6005 / Black RAL9005 to pass 1000 hour salt spray testing.customized available

Install

Panels terminated at finished ground level OR Panels terminated 300mm below finished ground level in a 300mm x 300mm trench, backfilled with Concrete / Pea gravel / Compacted fill.