anti-climb security fencing
Anti-climb security 358 fence is made from a strong welded mesh panel with a small mesh opening. It is challenging to penetrate and difficult to attack using conventional hand tools. Anti-climb security Fence Has the features of anti-climbing and anti-cutting. The fence name 358 comes from its panel mesh opening 3" × 0.5" × 8 gauge - approximate to 76.2mm × 12.7mm × 4mm mesh opening. Meanwhile, anti-climb security fencing has the features of anti-cutting and anti-climbing.
Feature anti-climb security fencing
Parameters Anti-Climb Security Fencing Panels
- Mesh pattern: 76.2mm (3") × 12.7mm (0.5") resistance welded well at each intersection
- Wire diameter: 4mm horizontal Wire and vertical Wire.
- Weld strength: range 540-690 N/m2
- Surface treatment: 358 mesh fence panels made from GALVAN wire, PVC powder coating (Min. 100 microns), or PVC powder painting. It provides additional protection and increases the potential life span.
- Colors: Green RAL 6005 or Black RAL 9005.
- Installation: Overlapped 75mm minimum at each post (shown as the two following pictures below) for securing with slotted clamp bars and M8 diameter bolts.
|Table-1: 358 MESH FENCE SPECIFICATIONS|
|Fence height m||Panel size (Height × Width)||Fence Post (Height × Size × Thick )||Clamp Bar (Height × Width × Thick )||Inter or corner Clamp No (PCS)|
|2.0||2007mm ×2515mm||2700mm ×60×60×2.5mm||2007mm ×60mm ×5.00mm||7 or 14|
|2.4||2400mm × 2515mm||3100mm×60×60×2.5mm||2400mm ×60mm ×5.00mm||9 or 18|
|3.0||2997mm ×2515mm||3800mm×80×80×2.5mm||2997mm ×80mm ×6.00mm||11 or 22|
|3.3||3302mm ×2515mm||4200mm×80×80×2.5mm||3302mm ×80mm ×6.00mm||12 or 24|
|3.6||3607mm ×2515mm||4500mm×100×60×3.0mm||3607mm×100mm×7.00mm||13 or 26|
|3.6||3607mm ×2515mm||4500mm×100×100×3.0mm||3607mm×100mm×7.00mm||13 or 26|
|4.2||4204mm × 2515mm||5200mm ×100 ×100 × 4.0mm||4204mm ×100mm × 8.00mm||15 or 30|
|4.5||4496mm × 2515mm||5500mm × 100 ×100 × 5.0mm||4496mm × 100mm ×8.00mm||16 or 32|
|5.2||5207mm ×2515mm||6200mm×120×120×5.0mm||5207mm×100mm×8.00mm||18 or 36|
anti-climb security fencing Fence Post
- Material: high-grade steel for maximum strength and rigidity.
- Post section: 80×60mm, 80×80mm or 120×60mm.
- Post Plate thickness: 2.5mm or 3.0mm.
- Finish: inside and outside galvanized (Min. 275 g/m2), subsequently covered with a polymer powder (Min. 60 microns).
- Colors: Green RAL 6005 or Black RAL 9005.
- Post cap: 80×60mm and 120×60mm post with metal caps, and 80×80mm post with a plastic cap.
Anti-Climb Security Fencing Metal clips and clamps are hot dips galvanized, then powder coating in green or black color.
When installing 358 fences on post need overlapped 75mm minimum at each post
Black 358 mesh fencing used for protection of residential.
358 security mesh panels package
358 high-security fences are packaged in plastic film then stored and transported on wooden pallets. Each package is firmly attached to the pallet by a particular type of tape.
anti-climb security fencing as an anti-climb & anti-cut fence barrier, a 358 welded wire security fence is designed with maximum security in mind. It is ideal for electronic alarm and detection systems, fencing in prisons, military sites and airports, industrial and commercial properties, warehouses, power plants, laboratories, secure hospitals, schools, parks, leisure, and recreational areas. 358 fence will give them a long-lasting and secure perimeter protection with an attractive appearance. Generally, 3.60m height fence is used in schools, parks, leisure and recreational areas; 5.20 m height fence is widely used in prison and military establishments.
2D clearvu fence
These panels increase strength by 6mm vertical wire and additional 4mm wires at 152.4mm centers on the inside face. So it has double horizontal wires at 152.4mm centers. This structure makes the fence panel very rigid and has a higher level of strength and security than the typical 358 mesh fence. 2D Security Fencing is widely used for schools, industrial sites, infrastructure, and high-security areas.
Specifications 2d anti-climb security fencing panels
Green color powder coating 2D security fencing with 6mm vertical wire and 4mm double horizontal Wire Details of 2D security fencing panel installed on post
Mesh opening: 76.2mm × 12.7mm welded at each intersection.
Horizontal wires: 4mm diameter at 12.7mm centers on the attack face, and intermittent 4mm double wires at 152.4mm centers on the inside face.
Vertical wires: 6mm diameter at 76.2mm centers.
The post has a single row of M8 threaded inserts, which allow the panels to be fitted with specialized pressed steel brackets and are pitched at 2.55m centers.
Panel width, height, finish, fence post, and clamps are similar to 358 anti-climb security fencing, and please see table-1.
3D anti-climb security Clearvu fencing
The 3D security fence is similar to the 358 mesh fence, and they are both made from 4.0mm wire in a 12.7×76.2mm mesh pattern. But 3D security fence enhanced its appearance with pressed horizontal 'V-shaped beams. It is a unique barrier solution that combines a high level of safety and aesthetic appearance. Usually, 3D security fencing is recommended for schools, recreational areas, hospitals, railways, ports, airports, warehouses, and industrial facilities or commercial facilities.3D anti-climb security mesh fencing panel with a V beam installed on a post with a V beam