This simple to install system offers site personnel maximum protection on the perimeter of construction slabs, around stair and lift wells, excavations etc. The removable panels, with built-in kickplates, and post system is easily transported, installed removed and stored.
The 2600mm x 1200mm galvanised welded mesh panel are manufactured from 5mmand 8mm steel wire with centres not exceeding 300mm, complying with EN Standard.
Featuring 90 degree bending top and bottom, incorporating a galvanised kickplate that helps prevent objects falling through the panel bottom.
The edge protect barrier system is an ideal choice, easy and fast to install.
1.The Raw Material is Low-Carbon Steel Wire(Q195),
Welded By Heavy Wire,
with 90 Degree on the top and bottom,
the piece of toe board was welded on the bottom of the Edge protection Fence to Protect Samll Stone Falling ,avoid hurting somebdoy.
It also has continous Wire, no cut wire, make the Temporary Portection Fence Smooth, Flat and Straight
2.Bending on the Top of Edge Protection Fence
There is a 90 Degree Bending on the top of Temporary Edge Protection Fence,
It is straight, make the fence flatling,
have high shock strength to protect Peoples.
Powder Coated Surface Treatment is more bautiful and anti-rust,
Make its long using life to save the cost
4.The Edge Safety Protection Fence can recycle many times
Bending on the bottom of Edge protection Fence
Toe Board on the front of Edge Protection Fence
The Toe Board on the bottom of Edge Protection Fence is welded on the Bottom Wire, to Prevent Small Stone falling ,Avoid Hurting Somebody.