358 mesh fencing - the highest level of security welded panel barrier

358 high security fence

. Simple structure is convenient for transportation;

. Installation is not restricted by topographic relief;

. The guardrail products are durable and moderately priced, suitable for large-scale use.

358 security mesh fence made from a type of strong welded mesh panel with a small mesh opening. It is extremely difficult to penetrate and difficult to attack using conventional hand tools. Has the features of anti-climbing and anti-cutting. The fence name 358 comes from its panel mesh opening 3" × 0.5" × 8 gauge - approximate to 76.2mm × 12.7mm × 4mm mesh opening.358 mesh fence has the features of anti-cutting and anti-climbing.

358 mesh fence Features:

• Anti-climbing: more small openings, no toe or finger holds.
• Anti-cut: robust wire and welded joints make cutting very difficult by bolt cutters and wire cutters.
• High strength welded at each intersection.
• Durable: covering Galvan and polymer powder coating ensure long service life.
• Mesh fencing specially configured to provide maximum visibility, especially used for emergency and electronic detection systems.

The panels are made of heavy mesh with a high level of security in width 2515mm and a height of 2007mm to 3302mm. Several panels can be installed on top of each other. This may be achieved a total height of 6300mm.

358 mesh panel size

• Mesh pattern: 76.2mm (3") × 12.7mm (0.5") resistance welded well at each intersection
• Wire diameter: 4mm horizontal wire and vertical Wire.
• Weld strength: range 540-690 N/m²
• Surface treatment: 358 mesh fence panels made from GALFAN wire, then PVC powder coating (Min. 100 microns), or PVC powder painting. It provides additional protection and increases the potential life span.
• Colors: Green RAL 6005, or Black RAL 9005.
• Installation: Overlapped 75mm minimum at each post (shown as the two following pictures below) for securing with slotted clamp bars and M8 diameter bolts.

Fence posts

• Material: high-grade steel for maximum strength and rigidity.
• Post section: 80×60mm, 80×80mm or 120×60mm.
• Post Plate thickness: 2.5mm or 3.0mm.
• Finish: inside and outside galvanized (Min. 275 g/m²), subsequently covered with a polymer powder (Min. 60 microns).
• Colors: Green RAL 6005, or Black RAL 9005.
• Post cap: 80×60mm and 120×60mm post with metal caps, and 80×80mm post with a plastic cap.
• Metal clips and clamps are hot dips galvanized then powder coating in green or black color.

358 high-security fences are packaged in the plastic film then stored and transported on wooden pallets. Each package is firmly attached to the pallet by a special type of tape.

Application: as an anti-climb & anti-cut through the barrier, 358 welded wire security fence is designed with maximum security in mind. It is ideally suitable for electronic alarm and detection systems, fencing in prisons, military sites, and airports, industrial and commercial properties, warehouses, power plants, laboratories, secure hospitals, schools, parks, leisure, and recreational areas. 358 fence will give them a long-lasting and secure perimeter protection with an attractive appearance. Generally, 3.60m height fence is used in schools, parks, leisure and recreational areas, 5.20m height fence widely used in prison and military establishments.

2D Security Fencing with 4mm double horizontal wire and 6mm vertical wire for greater strength.

These panels increase strength by 6mm vertical wire and additional 4mm wires at 152.4mm centers on the inside face. So it has double horizontal wires at 152.4mm centers. This structure makes the fence panel very rigid and has a higher level of strength and security than common 358 mesh fence. 2D Security Fencing is widely used for schools, industrial sites, infrastructure, and high-security areas.

Green color powder coating 2D security fencing with 6mm vertical wire and 4mm double horizontal wire

 

Details of 2D security fencing panel installed on post

2D security fencing Specifications 
Mesh opening: 76.2mm × 12.7mm welded at each intersection.
Horizontal wires: 4mm diameter at 12.7mm centers on the attack face, and intermittent 4mm double wires at 152.4mm centers on the inside face.
Vertical wires: 6mm diameter at 76.2mm centers.
The post has a single row of M8 threaded inserts which allow the panels to be but fitted with specialized pressed steel brackets and are pitched at 2.55m centers.
Panel width, height, finish, fence post, and clamps are the same to 358 mesh fence, please see table-1.

3D security fence enhanced its appearance with pressed horizontal 'V' shaped beams.

The 3D security fence is similar to 358 mesh fence, and they are both made from 4.0mm wire in 12.7×76.2mm mesh pattern. But 3D security fence enhanced its appearance with pressed horizontal 'V' shaped beams. It is a unique barrier solution which combines a high level of safety and aesthetic appearance. Usually, 3D security fencing is recommended for schools, recreational areas, hospitals, railways, port, airport, warehouses, and industrial facilities or commercial.